Standard 42mm grid, 7mm height units.
A round tube instead of a rectangular box. Slip-On: the lid telescopes down over the base, Split Ratio (above) sets how much of the height is base vs. lid. Split: base and lid meet flush and swing open on a hinge instead - a telescoping lid can't also be hinged, so Hinge Assembly and Create Lip (Structure tab) only work in Split mode. No Cover: a single open tube, no lid at all. Wall Thickness/Tolerance come from the Structure tab.
Structure murale modulaire avec tubes collés et espaces vides entre les alvéoles (~20x20 cm). Queues d'aronde pour assemblage infini et trous fraisés pour fixation murale.
💡 Evenly-spaced radial walls from the center to the base's inner wall, splitting it into pie-slice compartments.
💡 On the 3D grid: Click + drag = move divider | Ctrl + click + drag = add divider | Shift + click = delete divider
Activez « Place Tabs », cliquez un mur parallèle à la façade pour ajouter/retirer un onglet, puis désactivez pour cliquer sur l'onglet et éditer son texte.
Click on the bottom of a cell in 3D to configure socket rows and diameters.
Ctrl+click+drag on the 3D grid = add a divider | Shift+click = delete a divider
💡 A rows x columns array of blind round holes for holding drill bits, sockets, or ratchet inserts upright - cut down from the base's own open top, stopping short of the floor. Diameter steps evenly from Min to Max across the grid (left-to-right, top-to-bottom), like a real drill index or socket set.
Drag a row's end handle (the small tab past its last hole) in the 3D grid to stretch that row to a custom width, if the auto-packed layout doesn't fill the space the way you want.
Click + drag the plaque in the 3D view to reposition it.
Le mode Boîte Normale (Slip-On, Charnière, Ouverte, Grille simple et export STL) est 100% gratuit. Passez à PRO pour débloquer :